FTDI Usb to RS232 25 Pin DB25 Male Connector CNC Control Serial Adapter Cable
Injection molding DB25 Instead of Metal DB25 , With Screws , 100% test before sending
New Geniune FTDI/FT232RL Chip from UK . Top grade quality. One Year Quality Warranty, Win7/8/10 free installtion driver .
Multiple System Support : Support Windows XP/7/8/10/Android/Mac
OS/Linux/Vista (FTDI driver :www.ftdichip.com, FTDI installation
driver:https://www.ftdichip.com/Support/Documents/InstallGuides.htm)
Length: 6ft/180cm; FTDI Chip Usb to RS232 25 Pin DB25 Male Connector
Serial Adapter Cable CNC Controls Programming Cable Compatible C-232R
US-232R
FTDI Usb to RS232 25 Pin DB25 Male Connector CNC Control Serial Adapter Cable
FTDI Chip Usb to RS232 25 Pin DB25 Male Connector Serial Adapter Cable CNC Controls Programming Cable Compatible C-232R US-232R
16ft
industrial grade USB to RS232(DB25 Male) adapter cable. It is an ideal
solution for computer to communicate with many serial devices directly
through USB port such as CNC, PLC, plotter, modem, Scanner etc
This
cable is designed to make connection between USB port and serial
devices(RS232), NOT for parallel printer or other devices based on
parallel protocol (IEEE-1284), even though both have DB25 connector. It
is a USB to Serial cable with Software Handshaking using only three
signals: TXD(Pin2), RXD(pin3) and GND(pin7). Check your devices setup
prior to purchase.
Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
Industry
Standard FTDI chip set & device drivers to ensure maximum
compatibility and superior reliability for industrial application
DB25 connector with locking screws on one end, Plastic USB housing on the other end of the cable with data traffic
Use on my R2E3 mill and seems to work ok. Had to adjust Windows XP a bit.
Connected this to a new Windows 10 business desktop to run an old Anagraph plotter
Works very well with my amateur radio equipment.
It is a USB to RS-232 interface adapter cable. No external power supply needed.
Compatible
with USB and RS-232 standards. It is capable of performing the
conversion from single-ended USB signal into UART signal of RS-232. DB25
male connector is used for connection from RS-232 interface.
The
unique I/O circuit of the internal zero delay auto transceiver contained
in the converter controls the data stream direction automatically.
The
cable is plug-and-play for windows7, 8 and 10. U.S based technical
support, please contact the seller if you are not sure this cable works
or not for your devices.







The FT231X is a USB to full handshake serial UART interface device which simplifies USB implementations
and reduces external component count by fully integrating an MTP memory, and an integrated clock
circuit which requires no external crystal. It has been designed to operate efficiently with USB host
controllers by using as little bandwidth as possible when compared to the total USB bandwidth available.
The FT231X is a USB to serial UART interface
with full modem control and the following
advanced features:
Single chip USB to asynchronous serial data
transfer interface.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device
descriptors and CBUS I/O configuration.
Fully integrated clock generation with no
external crystal required plus optional clock
output selection enabling a glue-less interface
to external MCU or FPGA.
Data transfer rates from 300 baud to 3 Mbaud
(RS422, RS485, and RS232) at TTL levels.
512 byte receive buffer and 512 byte transmit
buffer utilising buffer smoothing technology to
allow for high data throughput.
FTDI’s royalty-free Virtual Com Port (VCP)
and Direct (D2XX) drivers eliminate the
requirement for USB driver development in
most cases.
Configurable CBUS I/O pins.
Transmit and receive LED drive signals.
UART interface support for 7 or 8 data bits, 1
or 2 stop bits and odd / even / mark / space
no parity
Synchronous and asynchronous bit bang
interface options with RD# and WR# strobes.
USB Battery Charger Detection. Allows for USB
peripheral devices to detect the presence of a
higher power source to enable improved
charging.
Device supplied pre-programmed with unique
USB serial number.
USB Power Configurations; supports buspowered, self-powered and bus-powered with
power switching
Integrated +3.3V level converter for USB I/O.
True 3.3V CMOS drive output and TTL input;
Operates down to 1V8 with external pull-ups.
Tolerant of 5V input.
Configurable I/O pin output drive strength; 4
mA(min) and 16 mA(max).
Integrated power-on-reset circuit.
Fully integrated AVCC supply filtering - no
external filtering required.
UART signal inversion option.
+ 5V Single Supply Operation.
Internal 3V3/1V8 LDO regulators
Low operating and USB suspend current; 8mA
(active-typ) and 125uA (suspend-typ).
UHCI/OHCI/EHCI host controller compatible
USB 2.0 Full Speed capable.
Extended operating temperature range; -40 to
85⁰C.
Available in compact, Pb-free, 20 Pin SSOP and
QFN packages (both RoHS compliant).
Driver Support
Royalty free VIRTUAL COM PORT
(VCP) DRIVERS for...
Windows 10 32,64 bit
Windows 8 32,64-bit
Windows 7 32,64-bit
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
Windows XP Embedded
Windows CE 4.2, 5.0 and 6.0
Mac OS-X
Linux 3.2 and greater
Android
Royalty free D2XX Direct Drivers
(USB Drivers + DLL S/W Interface)
Windows 10 32,64 bit
Windows 8 32,64-bit
Windows 7 32,64-bit
Windows XP and XP 64-bit
Windows Vista and Vista 64-bit
Windows XP Embedded
Windows CE 4.2, 5.0 and 6.0
MAC OS-X
Linux 2.6 and greater
Android
The drivers listed above are all available to download for free from FTDI website (www.ftdichip.com).
Various 3rd party drivers are also available for other operating systems - see FTDI website
(www.ftdichip.com) for details. For driver installation, please refer to
http://www.ftdichip.com/Documents/InstallGuides.htm
Buyer Notice
>> Shipping & Handling
1. Processing Time: 1-3 days for all orders.
2. Special Requests: Please list your special requests (color, package, etc) in the Notes Section when check out.
3. Shipping Way: Most orders(less than 2KG) are shipped by Aliexpress standard shipping / Netherland Post / Swiss Post
Under $5 orders are shipped by Seller Method Shipping.
Any other requirements about the shipping way, please contact us.
4. Delivery Time: Normally 15-60 days to get the order, except Brazil.Sometime the transit time may be long and vary,particularly during the holiday season.
Please contact us if you need help for the tracking.
5. Import Duties: Import duties, taxes and charges are not included in the item price or shipping charges.
>> Return & Refund
Return Policy: We accept Aliexpress return policy; Buyer pays return shipping.
Refund Policy: We provide reliable service policy.
bull If you receive the goods broken. Contact us for Full money refund or replacement.
bull If you don't receive the goods in stated delivery time. Contact us for Full money refund or replacement.
bull If you receive the goods with quality problem, contact us for half or full amount refund.
bull Any disatified with the product, please contact us first instead to open dispute or leave negative feedback.
>> Feedback
If you are satisfied with the item while it is in good condition, we sincerely to invite you to leave us all 5-star rating positive feedback.
If you are disatisfied with the item or service, please contact us first, we will supply the best solution and work harder to give you more excellent service.