FTDI FT232R USB to RJ45 RS485 Programming Cable for Deye Hybrid & Off-Grid Solar Inverters
Easily connect your PC to compatible Deye Hybrid and Off-Grid Solar Inverters for firmware upgrades, parameter configuration, inverter monitoring, diagnostics, commissioning, and maintenance.
Built with the Original FTDI FT232R chipset, this USB to RJ45 RS485 communication cable provides reliable, stable, and high-speed serial communication with excellent driver compatibility for Windows, macOS, and Linux.
Perfect for installers, solar engineers, distributors, maintenance technicians, and DIY solar enthusiasts.
Key Features
✔ Original FTDI FT232R Chipset
Genuine FTDI FT232R USB UART Controller
Stable COM Port Recognition
Fast Data Transmission
Low Latency Communication
Excellent EMI Resistance
Industrial Grade Reliability
Plug & Play Driver Support
✔ Designed for Deye RS485 Communication
Supports:
Firmware Upgrade
Parameter Configuration
Inverter Monitoring
Data Reading
Fault Diagnosis
System Commissioning
Maintenance
Remote Service
✔ USB to RJ45 RS485 Communication
Connector A
USB 2.0 Type-A Male
Connector B
RJ45 8P8C RS485
Industrial RS485 communication with strong anti-interference performance.
✔ Multiple Cable Length Options
Available Lengths
1 Meter
1.8 Meter
3 Meter
5 Meter
(Custom lengths available.)
✔ Premium Quality Construction
✔ Wide Operating System Support
Compatible with
Windows 11
Windows 10
Windows 8
Windows 7
Windows Server
macOS
Linux
Supports official FTDI VCP Drivers.
Compatible Deye Inverter Models
SG02LP1 Single-Phase Hybrid
SUN-7.6K-SG02LP1-EU
SUN-8K-SG02LP1-EU
SUN-10K-SG02LP1-EU
SUN-12K-SG02LP1-EU
SG05LP3 Three-Phase Hybrid
SUN-3K-SG05LP3-EU-SM2
SUN-4K-SG05LP3-EU-SM2
SUN-5K-SG05LP3-EU-SM2
SUN-6K-SG05LP3-EU-SM2
SUN-8K-SG05LP3-EU-SM2
SUN-10K-SG05LP3-EU-SM2
SUN-12K-SG05LP3-EU-SM2
SUN-14K-SG05LP3-EU-SM2
SUN-15K-SG05LP3-EU-SM2
SUN-16K-SG05LP3-EU-SM2
SUN-18K-SG05LP3-EU-SM2
SUN-20K-SG05LP3-EU-SM2
SG05LP1 Single-Phase Hybrid
SUN-3.6K-SG05LP1-EU
SUN-5K-SG05LP1-EU
SUN-6K-SG05LP1-EU
SUN-7K-SG05LP1-EU
SUN-7.6K-SG05LP1-EU
SUN-8K-SG05LP1-EU
SUN-10K-SG05LP1-EU
OG01LP1 Single-Phase Off-Grid
SUN-3K-OG01LP1-EU-AM2
SUN-3.6K-OG01LP1-EU-AM2
SUN-5K-OG01LP1-EU-AM2
SUN-6K-OG01LP1-EU-AM2
SG01LP1 Single-Phase Hybrid
SUN-8K-SG01LP1-EU
SUN-12K-SG01LP1-EU
SUN-14K-SG01LP1-EU
SUN-16K-SG01LP1-EU
SG04LP3 Three-Phase Hybrid
SUN-5K-SG04LP3-EU
SUN-6K-SG04LP3-EU
SUN-8K-SG04LP3-EU
SUN-10K-SG04LP3-EU
SUN-12K-SG04LP3-EU
SG01HP3 Three-Phase Hybrid
SUN-10K-SG01HP3-EU-AM2
SUN-29.9K-SG01HP3-EU-BM4
SUN-30K-SG01HP3-EU-BM4
SUN-35K-SG01HP3-EU-BM4
SUN-40K-SG01HP3-EU-BM4
SUN-50K-SG01HP3-EU-BM4
Applications
Ideal for:
Specifications
Item | Specification |
Chipset | Original FTDI FT232R |
Interface | USB 2.0 |
Communication | RS485 |
Connector A | USB Type-A Male |
Connector B | RJ45 8P8C |
Cable Color | Black |
Cable Length | 1M / 1.8M / 3M / 5M Optional |
Driver | FTDI VCP Driver |
Operating Systems | Windows / macOS / Linux |
Package Includes
About FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
