FTDI USB to RS232 2.5mm Audio Jack Serial Programming Cable

Upgrade your serial communication with this professional FTDI USB to RS232 2.5mm Audio Jack Serial Converter Cable. Designed for reliable programming, firmware upgrades, device configuration and serial communication, this cable features a genuine FTDI USB chipset for exceptional compatibility and stable performance.

Compatible with industrial equipment, PLCs, radios, controllers, embedded systems and other RS232 serial devices using a 2.5mm audio jack interface.

Key Features

✔ Genuine FTDI Chipset

• Built-in Original FTDI USB UART Controller

• Stable RS232 Communication

• High-Speed Data Transfer

• Automatic COM Port Detection

• Industrial Grade Reliability

• Excellent Anti-Interference Performance

✔ Dual Pinout Versions Available

Choose the correct wiring according to your device.

Pinout 01

• Tip → TXD

• Ring → RXD

• Sleeve → GND

Pinout 02

• Tip → RXD

• Ring → TXD

• Sleeve → GND

Please verify your device pinout before purchasing.

✔ Wide Operating System Compatibility

Supports

• Windows 11

• Windows 10

• Windows 8 / 8.1

• Windows 7

• Windows Vista

• Windows XP

• Windows 2000

• Linux

• Mac OS

• Android

No additional hardware required.

✔ Supports Official FTDI Drivers

• FTDI VCP Driver

• FTDI D2XX Driver

Integrated 1024-byte EEPROM supports:

• Vendor ID (VID) Re-write

• Product ID (PID) Configuration

• Serial Number Programming

• MProg Utility Support

• FT_Prog Configuration

Perfect for OEM applications and customized USB serial devices.

✔ High Performance Communication

• USB 2.0 Interface

• RS232 Serial Communication

• Half Duplex

• Non-Isolated Design

• Baud Rate: 300bps ~ 1Mbps

• Stable Low-Latency Data Transmission

✔ Ideal Applications

Perfect for:

• PLC Programming

• Radio Programming

• Industrial Automation

• Embedded Development

• Firmware Upgrade

• Device Configuration

• Instrument Calibration

• Medical Equipment

• POS Systems

• Barcode Scanner

• Communication Equipment

• GPS Receiver

• Industrial Controller

• Test Equipment

• RS232 Debugging

Product Specifications

Package Includes

• 1 × FTDI USB to RS232 2.5mm Audio Jack Serial Programming Cable

Why Choose Our FTDI Cable?

✅ Genuine FTDI chipset for superior compatibility

✅ Stable USB to RS232 communication

✅ Supports Windows, Linux, Mac OS and Android

✅ Official FTDI VCP & D2XX drivers

✅ EEPROM supports VID/PID customization

✅ MProg & FT_Prog compatible

✅ Durable industrial-grade cable

✅ Fast and reliable firmware programming

Purchasing Notes

• Please select the correct cable length before ordering:

  • 3.2ft (1M)

  • 6ft (1.8M)

• Two wiring versions are available (Pinout 01 and Pinout 02). Please confirm your device pin assignment before purchase to ensure compatibility.

For FTDI Driver Download,Please click here !

See the Product Here

The FT232R is the latest device to be added to FTDI range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.

The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.

• Single chip USB to asynchronous serial data transfer interface.

• Entire USB protocol handled on the chip - No USB-specific firmware programming required.

• UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.

• Fully assisted hardware or X-On / X-Off software handshaking.

• Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).

• In-built support for event characters and line break condition.

• New USB FTDIChip-ID? feature.

• New configurable CBUS I/O pins.

• Auto transmit buffer control for RS485 applications.

• Transmit and receive LED drive signals.

• New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.

• FIFO receive and transmit buffers for high data throughput.

• 256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.

• Adjustable receive buffer timeout.

• Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.

• New CBUS bit bang mode option.

• Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.

• Device supplied preprogrammed with unique USB serial number.

• Support for USB suspend / resume.

• Support for bus powered, self powered, and high-power bus powered USB configurations.

• Integrated 3.3V level converter for USB I/O .

• Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.

• True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.

• High I/O pin output drive option.

• Integrated USB resistors.

• Integrated power-on-reset circuit.

• Fully integrated clock - no external crystal, oscillator, or resonator required.

• Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.

• UART signal inversion option.

• USB bulk transfer mode.

• 3.3V to 5.25V Single Supply Operation.

• Low operating and USB suspend current.

• Low USB bandwidth consumption.

• UHCI / OHCI / EHCI host controller compatible.

• USB 2.0 Full Speed compatible.

• -40°C to 85°C extended operating temperature range.

Support Android Panel PC:

It support FT_prog

Drivers are available which allow FTDI devices to work with the following operating systems:

• Windows 8.1

• Windows 8.1 x64

• Windows 8

• Windows 8 x64

• Windows Server2012

• Windows Server 2008 R2

• Windows 7

• Windows 7 x64

• Windows Server 2008

• Windows Server 2008 x64

• Windows Vista

• Windows Vista x64

• Windows Server 2003

• Windows Server 2003 x64

• Windows XP

• Windows XP x64

• Windows ME

• Windows 98

• Linux

• Mac OS X

• Mac OS 9

• Mac OS 8

• Windows CE.NET (Version 4.2 and greater)

• Android

• Windows RT

Support for WinCE7.0
Initial functional testing conducted by FTDI has shown that the FTDI drivers function as expected on Windows CE 7.0

Support for older versions of Windows Desktop

NOTE: Microsoft have ended support for certifying XP and VISTA through their WHCK test program. As such current builds will still work on XP and VISTA but are not Microsoft certified.

Differences in Driver API

For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.

To locate the drivers you want to install for a device, select which of the driver types you wish to use (VCPorD2XX) and then locate the appropriate operating systems.  With the exception of Windows 98 and Windows ME, all devices are supported in each driver package.

If a VCP driver is required for Android please refer to the following application note: TN 132 Adding FTDI Devices VCP Driver Support to Android

 >> Shipping & Handling
1. Processing Time:  1-3 days for all orders.
2. Special Requests: Please list your special requests (color, package, etc) in the Notes Section when check out.
3. Shipping Way:  Most orders(less than 2KG) are shipped by Aliexpress standard shipping / Netherland Post / Swiss Post

                                Under $5 orders are shipped by Seller Method Shipping.

                                Any other requirements about the shipping way, please contact us.

4. Delivery Time: Normally 15-60 days to get the order, except Brazil.Sometime the transit time may be long and vary,particularly during the holiday season.
    Please contact us if you need help for the tracking.
5. Import Duties:  Import duties, taxes and charges are not included in the item price or shipping charges.

 >> Return & Refund

Return Policy: We accept Aliexpress return policy; Buyer pays return shipping.

Refund Policy:  We provide reliable service policy.

  • If you receive the goods broken. Contact us for Full money refund or replacement.

  • If you don't receive the goods in stated delivery time. Contact us for Full money refund or replacement.

  • If you receive the goods with quality problem, contact us for half or full amount refund.

  • Any disatified with the product, please contact us first instead to open dispute or leave negative feedback.

>> Feedback

If you are satisfied with the item while it is in good condition, we sincerely to invite you to leave us all 5-star rating positive feedback.
If you are disatisfied with the item or service, please contact us first, we will supply the best solution and work harder to give you more excellent service.