USB to RJ11 6P4C RS232 Serial Cable
Using this cable to control your PC to your Telescope device directly instead of hand controller .
The geniune FTDI Chipset Import from UK , 100% Quality Guarantee .
Length: 3.2ft 6ft 10ft 16ft
Compatible for Meade LX200 Serials .
100% test before sending .
Not responsible for the third party software .(please go to Meade official website. www.meade.com to download it)
It is RS232 Serial Signal Level Cable, please confirm your device is match with this pin Assignment .
Pin Assignment :
1- GND 2-GND, 3-RXD, 4-TXD
FTDI Driver : https://www.ftdichip.com/Drivers/VCP.htm
Installation Guide:http://www.ftdichip.com/Support/Documents/InstallGuides.htm
Package : 1 X USB to RJ11 6P4C Serial Cable
About FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
>> Shipping & Handling
1. Processing Time: 1-4 days for all orders.
2. Special Requests: Please list your special requests (color, package, etc) in the Notes Section when check out.
3. Shipping Way: Most orders(less than 2KG) are shipped by Aliexpress standard shipping / Netherland Post / Swiss Post
Under $5 orders are shipped by Seller Method Shipping.
Any other requirements about the shipping way, please contact us.
4. Delivery Time: Normally 15-60 days to get the order, except Brazil.Sometime the transit time may be long and vary,particularly during the holiday season.
Please contact us if you need help for the tracking.
5. Import Duties: Import duties, taxes and charges are not included in the item price or shipping charges.
>> Return & Refund
Return Policy: We accept Aliexpress return policy; Buyer pays return shipping.
Refund Policy: We provide reliable service policy.
• If you receive the goods broken. Contact us for Full money refund or replacement.
• If you don't receive the goods in stated delivery time. Contact us for Full money refund or replacement.
• If you receive the goods with quality problem, contact us for half or full amount refund.
• Any disatified with the product, please contact us first instead to open dispute or leave negative feedback.
>> Feedback
If you are satisfied with the item while it is in good condition, we sincerely to invite you to leave us all 5-star rating positive feedback.
If you are disatisfied with the item or service, please contact us first, we will supply the best solution and work harder to give you more excellent service.
