RS232 Cable for SOK 48V100Ah PL2303GT Chip USB to RJ12 Pro Server-Rack Battery to a PC Communication Cable
Connector A: USB 2.0
Connector B: USB RJ11 6P4C
Serial : RS232
Appliation : SOK Solar battery BMS
100% Original PL2303GT Chip , 100% Quality Guaranteed !
System Support : Win7/8/10/11/XP/2000/Android/Mac os/Linux/Vista
PVC Jacket, Bare Copper Wires .
OD:3.5MM
CE,Rohs Compliance .
100% Electricity , Appearance Test before Shipment
Driver download link:
https://www.prolific.com.tw/UserFiles/files/PL23XX_Prolific_DriverInstaller_v408.zip
Application: 1 x PL2303GT USB to RJ12 Serial Converter Communication Cable for SOK Battery BMS
About PL2303GT
PL2303GT USB to RS232 Serial Bridge Controller With Built-in RS232 Transceiver
USB Interface
-Single-chip USB to RS232 asynchronous serial data transfer interface.
-Fully Compliant with USB 2.0 specification (Full-Speed Mode).
-UHCI/OHCI (USB 1.1), EHCI (USB 2.0), xHCI (USB 3.1) Host Controller Compatible.
-Royalty-free USB to Virtual Com Port (VCP) drivers for Windows, Mac, Linux, and Android.
-Highly
integrated USB 1.1 FS Transceiver. Integrated termination resistors and
pull-up resistor to reduce PCB external components.
-Supports
OTPROM (One-Time Programmable ROM) for USB device descriptors
configuration. OTPROM can be programmed directly through USB port.
-Each IC has unique ID (for Serial Number).
-Supports bus-power, self-power and high-power USB device configuration.
-Supports Windows USB Selective Suspend (Remote Wakeup enabled).
-Supports 3.3V VBUS voltage operation
UART Interface (RS232)
-Built-in RS232 Transceiver:
--Meets EIA/-TIA-232F standards with 5.0V power supply
--Guaranteed 1000kbps transmission rate under loading
--Three RS232 Drivers design
--Five RS232 Receivers (always active)
--Latch-up free
-RS232 Serial Port Output Interface:
--Full UART RS232 interface pins (TXD, RXD, RTS, CTS, DTR, DSR, DCD, and RI)
--Flexible baud rate support up to 1Mbps
--5, 6, 7 or 8 data bits
--Odd, Even, Mark, Space, None parity mode
--One, one and a half, or two stop bits
--Hardware and Software Flow Control
--Provides RS232 shutdown indicator pin
-1024-byte bi-directional data FIFO buffers (768-byte receive/256-byte transmit) for faster data throughput.
-Configurable Transmit (TX) and Receive (RX) LED pins using configurable GPIO pins.
