Upgrade, monitor and configure your Easun Power inverter with a professional FTDI USB to RJ45 RS485 communication cable. Built with the genuine FTDI FT232RL chipset, this cable delivers reliable serial communication for inverter monitoring, firmware upgrades, parameter configuration, and maintenance.
Designed specifically for Easun Power ISolar MLV-U series hybrid solar inverters, it provides stable data transmission and broad compatibility with Windows, macOS and Linux systems.
Premium FTDI FT232RL USB-UART controller
Fast and stable RS485 communication
Excellent driver compatibility
Low latency and reliable performance
Compatible with Easun Power ISolar MLV-U Hybrid Solar Inverters.
Ideal for:
Inverter Monitoring
Parameter Configuration
System Diagnostics
Firmware Upgrade
Maintenance & Commissioning
High-speed USB to RS485 converter
RJ45 interface with RS485 communication
Stable long-distance signal transmission
Excellent anti-interference performance
Industrial-grade communication quality
Supports
Windows 11
Windows 10
Windows 8
Windows 7
Linux
macOS
FTDI drivers install quickly for immediate use.
Premium PVC jacket
Flexible industrial cable
Durable molded USB connector
Reliable RJ45 plug
Copper conductors for stable signal quality
Suitable for field installation and daily maintenance.
Chipset: FTDI FT232RL
USB Interface: USB Type-A Male
Device Interface: RJ45
Communication: RS485
Application: Solar Inverter Communication
Function:
Monitoring
Configuration
Firmware Upgrade
Diagnostics
Cable Length Options:
1.0M
1.8M
3.0M
5.0M
Custom Length Available
Cable Color: Black
Easun Power
ISolar MLV-U Series
Compatible with RJ45 RS485 communication port models.
1 × FTDI FT232RL USB to RJ45 RS485 Communication Cable
✅ Genuine FTDI FT232RL Chip
✅ Stable Industrial RS485 Communication
✅ Fast Driver Installation
✅ High Compatibility
✅ Reliable Firmware Upgrade
✅ Durable Industrial Cable
✅ Excellent Signal Integrity
✅ Plug & Play
About FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
