Product Description
FTDI FT232RL USB to RJ10 4P4C RS485 Programming Cable for Gefran Gefran F055002 J2 Port
Upgrade your industrial communication setup with this high-quality USB to RS485 Programming Cable, specially designed as a compatible replacement for the Gefran F055002 communication interface cable. Built with the original FTDI FT232RL chipset, this adapter provides reliable and stable Modbus RTU communication between your PC and Gefran controllers, indicators, and other RS485-enabled devices equipped with the J2 communication port.
Perfect for engineers, maintenance technicians, automation integrators, and industrial control applications.
Key Features
✔ Original FTDI FT232RL Chipset
Equipped with a genuine FT232RL USB-to-Serial converter for fast, stable, and interference-resistant data transmission.
✔ Compatible with Gefran F055002 J2 Port
Designed specifically for devices requiring the Gefran F055002 RS485 communication interface, allowing convenient parameter configuration and Modbus communication.
✔ Supports Modbus RTU Protocol
Ideal for programming, commissioning, diagnostics, monitoring, and data acquisition applications using Modbus RTU over RS485.
✔ Plug and Play Installation
FTDI drivers are widely supported and easy to install. Once connected, the cable appears as a virtual COM port for seamless integration with configuration software.
✔ Industrial Grade Construction
Manufactured with high-quality PVC insulation and durable connectors to withstand demanding industrial environments.
✔ Wide Operating System Compatibility
Compatible with:
Product Specifications
Chipset: Original FTDI FT232RL
Interface A: USB Type-A Male
Interface B: RJ10 4P4C Connector
Communication Standard: RS485 Half-Duplex
Protocol Support: Modbus RTU
Cable Length: 1.8m (6FT)
USB Standard: USB 2.0 Full Speed
Operating Temperature: -20°C to +70°C
Housing Material: Industrial Grade PVC
Driver Support: FTDI Virtual COM Port (VCP)
Applications
Suitable for communication and configuration of Gefran equipment using the J2 RS485 interface, including:
Gefran Temperature Controllers
Gefran PID Controllers
Gefran Process Indicators
Gefran Power Controllers
Gefran Industrial Automation Devices
Modbus RTU Network Commissioning
Industrial Maintenance and Diagnostics
Package Includes
Warm Tips
This is a compatible replacement cable designed for devices using the Gefran F055002 communication interface standard.
Please verify your device uses an RJ10 4P4C J2 RS485 port before purchasing.
Professional technical support is available if you need assistance with wiring or communication setup.
Why Choose Our Cable?
✓ Genuine FTDI chipset
✓ Stable Modbus communication
✓ Industrial-grade quality
✓ Plug-and-play convenience
✓ 100% tested before shipment
✓ Fast technical support
About FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.
Single chip USB to asynchronous serial data transfer interface.
Entire USB protocol handled on the chip - No USB-specific firmware programming required.
UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.
Fully assisted hardware or X-On / X-Off software handshaking.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
In-built support for event characters and line break condition.
New USB FTDIChip-ID? feature.
New configurable CBUS I/O pins.
Auto transmit buffer control for RS485 applications.
Transmit and receive LED drive signals.
New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.
FIFO receive and transmit buffers for high data throughput.
256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.
New CBUS bit bang mode option.
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Device supplied preprogrammed with unique USB serial number.
Support for USB suspend / resume.
Support for bus powered, self powered, and high-power bus powered USB configurations.
Integrated 3.3V level converter for USB I/O .
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.
High I/O pin output drive option.
Integrated USB resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
UART signal inversion option.
USB bulk transfer mode.
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller compatible.
USB 2.0 Full Speed compatible.
-40°C to 85°C extended operating temperature range.
Drivers are available which allow FTDI devices to work with the following operating systems:
Windows 10
Windows 8.1 x64
Windows 8
Windows 8 x64
Windows Server2012
Windows Server 2008 R2
Windows 7
Windows 7 x64
Windows Server 2008
Windows Server 2008 x64
Windows Vista
Windows Vista x64
Windows Server 2003
Windows Server 2003 x64
Windows XP
Windows XP x64
Windows ME
Windows 98
Linux
Mac OS X
Mac OS 9
Mac OS 8
Windows CE.NET (Version 4.2 and greater)
Android
Windows RT
Support for WinCE7.0
Initial functional testing conducted by FTDI has shown that the FTDI drivers function as expected on Windows CE 7.0
Support for older versions of Windows Desktop
NOTE: Microsoft have ended support for certifying XP and VISTA through their WHCK test program. As such current builds will still work on XP and VISTA but are not Microsoft certified.
Differences in Driver API
For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.
To locate the drivers you want to install for a device, select which of the driver types you wish to use (VCPor D2XX) and then locate the appropriate operating systems. With the exception of Windows 98 and Windows ME, all devices are supported in each driver package.
If a VCP driver is required for Android please refer to the following application note: TN 132 Adding FTDI Devices VCP Driver Support to Android
